Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
3Layer-Polyethylene
SMOOTHFLOW Pipe
FBE External
dual layer aro coating
FBE External

SMOOTHFLOWآ UV Dual Layer Coating and FBE Lining

PRODUCT DISCRIPTION:

“SMOOTHFLOWآ” UV Dual layer coated pipes are carbon steel pipes coated externally with آ dual layer fusion bonded epoxy coating The external coating is provided for corrosion resistance, chemical resistance, UV resistance and has very low moisture permeability. Internal coating is of fusion bonded epoxy. It provides low frictional resistance thereby increasing “C” value, it also prevents encrustation. The two coating layers in dual layer coated pipe are as follows:

Layer 1: This is the corrosion protective layer. This layer is of fusion bonded epoxy which offers very good corrosion protection. The fusion bonded epoxy has a very good bonding with the blasted steel surface.
Layer 2: This layer is a coat of fusion bonded polyester. آ This layer absorbs the UV radiation that causes degradation and erosion of the FBE coating.

STANDARDS AND SPECIFICATIONS:

“SMOOTHFLOWآ” UV dual layer coated pipes are manufactured according the following standards:

ق€ CSA Z245.20
ق€ IS 3581

 
FEATURES OF “SMOOTHFLOWآ” UV PIPES:

Long term corrosion & weathering protection:
ق€ Base coat of Fusion bonded epoxy has excellent adhesion to steel & provides long term corrosion protection to steel pipelines operating over a wide range of temperatures.
ق€ Provides excellent resistance to cathodic disbondment.
ق€ Top coat of Fusion bonded polyester provides U V protection & protection from harsh weather conditions for the designed lifespan.
ق€ Coating has been designed for good chemical resistance under various installation conditions.
ق€ Internal coating of fusion bonded epoxy helps in corrosion protection and provides a smooth surface thereby increasing “C” value.

Long Working Life :
ق€ Pipe has constant performance characteristics through out the life span. Service life of more than 75 years.

Customized Solutions :
ق€ “SMOOTHFLOWآ” UV dual layer external coating and FBE internal lining can be applied from diameters 400 mm to 2000 mm with lengths of up to 12m.
ق€ “SMOOTHFLOWآ” UV dual layer external coating can be applied from diameters 25 mm to 2000 mm with lengths of up to 12m.
ق€ Bends (Elbows), Tees, reducers, couplers can be coated with same coating.
ق€ Available in blue, red and yellow colors.

Benefits:
ق€ Coating life expectancy of above 75 years.
ق€ High productivity rate enabling quicker availability of coated pipe on site.
ق€ Protection over a wide temperature range
ق€ Ability to be stored & used in all climatic conditions.
ق€ Long term adhesion to steel.
ق€ Resistance to UV radiation & rain.
ق€ High resistance to cathodic disbondment.
ق€ High Gloss and smooth coatings gives pleasant appearance.
ق€ Provides enhanced corrosion resistant properties.
ق€ Excellent chemical resistance.
ق€ Excellent electrical insulation
ق€ Low water absorption
ق€ Pinhole free homogeneous coating.
ق€ 100% Solvent free- environmentally friendly and no risk of solvent entrapment.

 
APPLICATIONS:

“SMOOTHFLOWآ” UV Dual layer pipes are used for above ground exposed pipelines. These dual layer coatings provide excellent long term corrosion protection & very good resistance to cathodic disbondment. The coating also withstands the harsh weather conditions, be it harsh UV radiation, Pollution or heavy rains. These pipes are manufactured

“SMOOTHFLOWآ” UV Dual layer pipes are used in the following applications where the pipes are installed aboveground.
ق€ Drinking water pipelines.
ق€ Oil and gas pipelines (Only external dual layer coating)
ق€ In plant process water applications

 
ABOUT SCAN INDIA:

Scan India is a pioneer in corrosion protective coatings on carbon steel pipes. In 2006, Scan India started production of “SMOOTHFLOWآ” pipes. These are carbon steel pipes coated externally and internally with 3 layer polyethylene (3LPE) coating intended for buried or submerged application.آ  Scan India is the first and till date only company to adapt 3 layer polyethylene coating technology for internal pipe coating. Scan India produces various other types of anti corrosion coatings and flow assurance coatings like FBE, Dual layer FBE, Internal FBE and internal 3LPE. Scan India is an ISO 9001:2008 certified organization.

 
MANUFACTURING CAPABILITIES:
ق€ Diameter range  
  External coating only: آ  25 mm to 2000 mm
  Internal and external coating: 400mm to 2000 mm
ق€ Pipe lengthآ آ  6 m to 12 m
ق€ Operating temperature range -40°C to 80°C
ق€ Coating thickness  
  Internal lining: Maximum up to 500 microns
  External coating:آ  Maximum up to 750 microns